Specification:

Shrinkage Bar Mould is made of mild steel and has accurately machined faces. The parts of the moulds are tight fitting and firmly held together when assembled. Shrinkage Bar Moulds are supplied with base plate and four stainless steel smooth reference pins.

Technical Specifications:
Shrinkage Bar Mould (One Gang):
	Product Code: ZI 1015 Specifications: 25mm x 25mm x 250 mm effective gauge length
Shrinkage Bar Mould (Two Gang):
	Product Code: ZI 1016 Specifications: 25mm x 25mm x 250mm effective gauge length & two compartments assembled on angle base plate.
Shrinkage Bar Mould (Three Gang):
	Product Code: ZI 1017 Specifications: 25mm x 25mm x 250mm effective gauge length & three compartments assembled on angle base plate.
Shrinkage Bar Mould (Four Gang):
	Product Code: ZI 1018 Specifications: 25mm x 25mm x 250mm effective gauge length & four compartments assembled on angle base plate.

Note: Shrinkage Bar Mould are also available in gun metal as well as with knurled and threaded reference pins.
Spares: Stainless Steel smooth or knurled and threaded reference pins as required. Supplied in packs of one dozen.